We have a complete line of Steel turnbuckles including:
jaw & jaw, eye & eye, hook & hook, eye & jaw, and hook & eye.
Order before 4:30pm CST Mon.-Fri. for Same Day Shipping
Turnbuckle stub ends are devices used for adjusting the tension or length of ropes, cables, tie rods, and other tensioning systems. It normally consists of two threaded eye bolts, one screwed into each end of a small metal frame, one with a left-hand thread and the other with a right-hand thread. The tension can be adjusted by rotating the frame, which causes both eye bolts to be screwed in or out simultaneously, without twisting the eye bolts or attached cables.
Our turnbuckles are an excellent choice for marine, sailing, boating & industrial applications and the preferred equipment for adjusting tension on ropes, cables and lines.
These Turnbuckles are:
- Corrosion Resistant
- Drop forged
- In-line or Straight Pull Applications
- Designed toASTM F1145-92 Specifications
Hooks not supplied on sizes larger than 1.1/2” diamater Jaw ends up to 5/8”:
Fitted with bolt and nut. Jaw ends 3/4” & up: Fitted with pin and cotter.
Our specialists are standing by and ready to help.
Yes actual real people to get you what you need fast.
Call Today! (866) 848-2032 or shop below.
Please Call for Pricing on this item.
Call one of our experts at (866) 848-2032 or email email@example.com to order yours today.
There are no products matching the selection.
Please call one of our experts at (866)-848-2032 or email firstname.lastname@example.org for pricing on this item.