Save 10% Today Get 100% free shipping in the U.S.A. on all online orders
CALL US: 866-848-2032
0

Cart

0 items - $0.00

You have no items in your shopping cart.

Galv. Shoulder

- Fast & Free Shipping

Order before 4:30pm CST Mon.-Fri. for Same Day Shipping

GALVANIZED SHOULDER PATTERN EYE BOLT WITH HEAVY HEX NUT - IMPORT

Forged carbon steel, heat treated, hot galvanized. Heavy hex nut according to ASME/ANSI B18.2.2.

CAUTION: Never exceed the working load limit. Never insert the point of a hook in an eyebolt. Always use a shackle. Read important warnings in T.O.C. — EYE BOLTS and GENERAL WARNINGS

 
 

Our specialists are standing by and ready to help. (Yes real people.)

Tim Murphy - Call Us

"If you have any questions EMAIL US
or call toll free." 1-(866)-848-2032

shipping truck Free Shipping.

Set Descending Direction

Set Descending Direction
product specifications:
Galv. Shoulder Pattern.csv

WARNING: * Working Load Limit applies to straight line pull only. When applying load at an angle the Working Load Limit is drastically reduced. Refer to Standard Rigging Handbook for reductions in Working Load Limit of shoulder pattern eye bolts for angular lifting. Above ratings apply only when the shoulder is in full contact with the mating part of the load and the load is applied in the plane of the eye. (see illustration)

Specs on Eye Bolts - (To Order Click the product above)

WARNING: * Working Load Limit applies to straight line pull only. When applying load at an angle the Working Load Limit is drastically reduced. Refer to Standard Rigging Handbook for reductions in Working Load Limit of shoulder pattern eye bolts for angular lifting. Above ratings apply only when the shoulder is in full contact with the mating part of the load and the load is applied in the plane of the eye. (see illustration)

Being on of the most common items in the rigging industry, where a eye bolt is needed as an anchor point for lifting or pulling make sure you make the right choice of bolt for safety reasons.

You should be aware of a few guidelines:

  • Use regular patter eyebolts should be used for straight line pulling only.
  • Don’t use if the eye has been bent on your bolt.
  • Make sure the have a look at the thread and bolt to make sure it’s not cross threaded but properly threaded prior to use.
  • To make angular lift use a shoulder eye bolt instead of a regular patter bolt.
 
FREE Fast Shipping
All online orders ship for free within the USA
MURPHY Guarantee
If you don't love any stock item, you get your money back
RETURN & Exchange
You can return or exchange any stock item (some exclusions apply)
QUESTIONS
We here for you
Call Us: 866-848-2032