Order before 4:30pm CST Mon.-Fri. for Same Day Shipping

Hooks not supplied on sizes larger than1.1/2” diam. Jaw ends up to 5/8”: Fitted with bolt and nut. Jaw ends 3/4” & up: Fitted with pin and cotter.

A turnbuckle is a device for adjusting the tension or length of ropes, cables, tie rods, and other tensioning systems. It normally consists of two threaded eye bolts, one screwed into each end of a small metal frame, one with a left-hand thread and the other with a right-hand thread. The tension can be adjusted by rotating the frame, which causes both eye bolts to be screwed in or out simultaneously, without twisting the eye bolts or attached cables.

Specs for Galvanized Turnbuckles — (To order click the product above)